You must be logged in and verified to contact the designer.
3D Chassis for AVANT SLOT Audi R10 TDI LMP1 (Inline AllinOne) - 1/32
High performance 3D Inline replacement chassis to improve your model handling and speed in all kinds of tracks.
Built-in Inline motor mount with All-In-One flex design, allowing 2 or 4 suspension/fixing points with several setup options**.
Rear axle with 0,0mm offset and with support for conventional bearings or ball bearings(diameter: 4.75mm).
Front axle height can be adjusted using bushings and M2 screws.
With some types/models of guides, it will have to be horizontally cut at top/front to allow regular operation without interfering with the body (see product photos).
Original cockpit shall be trimmed at back/bottom or replaced with one in lexan to allow proper fit of the chassis / engine assembly and allow some suspension movement.
No additional trimming required for proper fit.
Light weight and strong.
Parts supplied: Chassis, 4x 1mm spacers and suspension top clamping bar.
** See product photos for more informations about chassis setup.
Note: Material stiffness in descending order: Black (slightly stiffer) - White - Colors polished - Whitepolished (less stiffer). Materials in Black slightly stiffer - more suitable for wooden tracks and Carrera.
White, Colors and White polished, more flexible - best for Ninco tracks.