You must be logged in and verified to contact the designer.
Product Description
This clip replaces the stock clip for the Karas Kustoms (Karas Pen Co) Ink fountain and rollerball pen. It uses the original screws and will require a 5/64" hex wrench to install (not included). Be careful not to strip the screws when installing the clip. Lightly tighten each screw before snugging them up. Fully tightening one screw before the other can result in stripping out the threads on the cap of the pen. Very little pressure is needed. Contact me if you have questions. The non-steel versions of these clips may have a small gap after installation. This is due to the shrinkage of the material after casting and the polishing process. With the steel versions of the clip there will be some texture on the part from the printing process, it will not be totally smooth. To learn more about that process, look here- https://www.shapeways.com/materials/steel?li=nav
This is an aftermarket part and is not a Karas Pen Co (Karas Kustoms) product.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: