Gray PA12
Bully 2 Full Print Rear Axle Replacement
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$131.89
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
These parts will replace the rear axle on a Bully2.
It uses stock Bully2 gears and bearings (minus the small iddler gear), and the Bully2 rear shafts (and bearing).
You will loose 91gr compared to stock (283gr vs 192gr) and get the rear motor close to the tube.
On the inside of the gearbox it uses a locking nut close to the 4º gear and a normal nut close to the 2º gear (see pictures)
PS:
On the rear shafts the inner bearing stop needsto be sanded down to a smaller diameter so it can fit the tubes.
It uses stock Bully2 gears and bearings (minus the small iddler gear), and the Bully2 rear shafts (and bearing).
You will loose 91gr compared to stock (283gr vs 192gr) and get the rear motor close to the tube.
On the inside of the gearbox it uses a locking nut close to the 4º gear and a normal nut close to the 2º gear (see pictures)
PS:
On the rear shafts the inner bearing stop needsto be sanded down to a smaller diameter so it can fit the tubes.
Details
What's in the box:
Bundle Part
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
