You must be logged in and verified to contact the designer.
Product Description
These parts will replace the rear axle on a Bully2.
It uses stock Bully2 gears and bearings (minus the small iddler gear), and the Bully2 rear shafts (and bearing).
You will loose 91gr compared to stock (283gr vs 192gr) and get the rear motor close to the tube.
On the inside of the gearbox it uses a locking nut close to the 4º gear and a normal nut close to the 2º gear (see pictures)
PS:
On the rear shafts the inner bearing stop needsto be sanded down to a smaller diameter so it can fit the tubes.