White Natural Versatile Plastic
Supplier NVG6, Hull (1:100, RC)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$412.87
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Parts in "Strong & Flexible" material to complete the model of the historic German supply vessel "NVG 6 Holstentor" in 1:100 scale:
Size of the model:
length: 52.9 cm
width: 11.2 cm
NVG 6 was built in 1966 as one of the first supply vessels to support the offshore activities in the North Sea, and it was run by DDG Hansa. Many of the following supply vessels were derived from this design. After 1967, the vessel was named „Holstentor“, and while it was sold later, it was operated until 2012, last as „Mardive III".
Technical data of the original:
length: 52.9 m
width: 11.3 m
The Model is designed in 1:100 scale. It can be built as a model for static display or as a working RC boat. It is set up to enable radio control functions (RC), driven by the twin shaft propulsion. The rudder and the bow thruster are prepared for RC function, too. As the model is rather small, the model can only be used in quiet water conditions. However, this model is not set up to be ready to run, it requires refinement and is only suitable for skilled model builders. The aft deck of the model can be planked with real wood veneer. The model is prepared accordingly. An assembly manual, a set of drawings and further informations can be found on my website (download section):
http://www.microboathobby.com/
To complete the RC model, additional components are needed:
More information on the original is available on e.g. the following ressources:
- hull
Size of the model:
length: 52.9 cm
width: 11.2 cm
NVG 6 was built in 1966 as one of the first supply vessels to support the offshore activities in the North Sea, and it was run by DDG Hansa. Many of the following supply vessels were derived from this design. After 1967, the vessel was named „Holstentor“, and while it was sold later, it was operated until 2012, last as „Mardive III".
Technical data of the original:
length: 52.9 m
width: 11.3 m
The Model is designed in 1:100 scale. It can be built as a model for static display or as a working RC boat. It is set up to enable radio control functions (RC), driven by the twin shaft propulsion. The rudder and the bow thruster are prepared for RC function, too. As the model is rather small, the model can only be used in quiet water conditions. However, this model is not set up to be ready to run, it requires refinement and is only suitable for skilled model builders. The aft deck of the model can be planked with real wood veneer. The model is prepared accordingly. An assembly manual, a set of drawings and further informations can be found on my website (download section):
http://www.microboathobby.com/
To complete the RC model, additional components are needed:
- two motors N20 for main propulsion
- two shafts (1mm diameter) with stern tubes (4mm diameter) and props (max. 20mm diameter)
- one motor M700 or M700L (DC Ø 7mm x 15mm) for bow thruster
- one gear M0.4 10 teeth and one gear M0.4 15 teeth for bow thruster (2mm high, 1mm shaft)
- RC equipment of your choice
More information on the original is available on e.g. the following ressources:
- Article on the ship (in German):
http://www.ddghansa-shipsphotos.de/holstentor100.htm - Commercially available plan to build a model (in German):
http://www.sievers-verlag.de/shop/de/csc_article_details.php?nPos=30&saArticle[ID]=136
Details
What's in the box:
Rumpf 1zu100 V07 Beschlagteile V01
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
