Aluminum
3652 main body
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$116.51
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
3652 based on a vintage Panerai prototype
NOTE: you need to tap the screw holes for the crown guard
TAP CHART - REQUIRED METRIC THREADS FOR THE CROWN GUARD SCREWS
You will need to insert a peg in the blind hole that's inside to secure the movement ring.
AND DRILL THE HOLES FOR THE LUGS. They come pre-punched to make it easier.
The reason for this is that the case is too thin to be printed otherwise.
- Dimensions similar to the original watch: 3646 type D
- Width: 47mm
- Inner case diameter: 40.50mm
- Bezel and case back seats have an extra height of 0.5mm so you can polish or reshape the case without problem
- Lugs, bezel, movement ring and case back are not included
NOTE: you need to tap the screw holes for the crown guard
TAP CHART - REQUIRED METRIC THREADS FOR THE CROWN GUARD SCREWS
- recommended screws: M1.6x2.5
- intended tap size: M1.6x0.35
You will need to insert a peg in the blind hole that's inside to secure the movement ring.
AND DRILL THE HOLES FOR THE LUGS. They come pre-punched to make it easier.
The reason for this is that the case is too thin to be printed otherwise.
Details
What's in the box:
3652 main body
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$19.11
