White Processed Versatile Plastic
rtf203-01 TF2 Mojave Front Body Mount, Slider
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$59.58
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
***IT HAS COME TO OUR ATTENTION THAT ONLY A SHORT SERVO WILL WORK WITH THIS MOD. A STANDARD DEEP SERVO IS TOO LONG AND WILL PREVENT THE OUTER MOUNT FROM FITTING***
To those of you with a RC4WD Trail Finder 2, I think it is very clear that it is a masterpiece of design. There is, however, one small problem; the body installation and removal process is a little in-depth to say the least. Ampro Engineering is very proud to announce a new body mounting system for the RC4WD Trail Finder 2 Mojave. This set will let you install and remove the body with no tools and only the removal of a couple of body pins. The shell is rigidly mounted and cannot accidentally pop loose. All printed parts are in one order.
This is the "Slider" version with a cab floor detail and only requires rear body pins on the rear mounts to function. You will need 25-30mm M3 machine screws to install this along with a couple smaller (8mm) for the body side mount. Please see the video below for a full installation. THE TF2 CANNOT HAVE A ADDITIONAL FRONT BUMPER WITH THIS KIT.
The "Pin" Version is also available with cars with a front bumper.
RTF203-02
Cab floor delete variations will come soon at a lower cost.
To those of you with a RC4WD Trail Finder 2, I think it is very clear that it is a masterpiece of design. There is, however, one small problem; the body installation and removal process is a little in-depth to say the least. Ampro Engineering is very proud to announce a new body mounting system for the RC4WD Trail Finder 2 Mojave. This set will let you install and remove the body with no tools and only the removal of a couple of body pins. The shell is rigidly mounted and cannot accidentally pop loose. All printed parts are in one order.
This is the "Slider" version with a cab floor detail and only requires rear body pins on the rear mounts to function. You will need 25-30mm M3 machine screws to install this along with a couple smaller (8mm) for the body side mount. Please see the video below for a full installation. THE TF2 CANNOT HAVE A ADDITIONAL FRONT BUMPER WITH THIS KIT.
The "Pin" Version is also available with cars with a front bumper.
RTF203-02
Cab floor delete variations will come soon at a lower cost.
Details
What's in the box:
rtf203-01 TF2 Mojave Front Body Mount, Slider
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
