White Natural Versatile Plastic
Chris Craft Shields TD19
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$78.95
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Custom made for a feed slot cut of 177mm long & 17mm wide (6.9" x 0.67") and Track Depth = 19mm
You will need to drill two holes for the insert's bottom nipples.
WHITE textured nylon surface can be dyed a color. BLACK is best for UV protection.
The insert's width has been spread apart 6 degrees for a snugger fit and the side barb rails and bottom pin nipples have been included in this final version.
DRILLING INSTALLATION for Nipple pin :
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit into each nipple pin's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum channel.
Remove the insert to center punch marks and complete the drilling. Use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent sliding.
Refer to the YouTube video for installation. https://youtu.be/VvgMuhgE8TI
For warranty and support, please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Help at TomLuQue@gmail.com (I can change the length if needed)
Ver 5/8/24 Chris Craft Shields C1 TD19 PG988A.4
You will need to drill two holes for the insert's bottom nipples.
WHITE textured nylon surface can be dyed a color. BLACK is best for UV protection.
The insert's width has been spread apart 6 degrees for a snugger fit and the side barb rails and bottom pin nipples have been included in this final version.
DRILLING INSTALLATION for Nipple pin :
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit into each nipple pin's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum channel.
Remove the insert to center punch marks and complete the drilling. Use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent sliding.
Refer to the YouTube video for installation. https://youtu.be/VvgMuhgE8TI
For warranty and support, please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Help at TomLuQue@gmail.com (I can change the length if needed)
Ver 5/8/24 Chris Craft Shields C1 TD19 PG988A.4
Details
What's in the box:
Chris Craft Shields C1 TD19 PG988A.4
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$60.88
$32.00
$43.66
