Polished Bronzed-Silver Steel
TM M&P9 Match Trigger
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$39.25
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Designed to be custom fitted to individual M&P9s it offers adjustable pretravel and overtravel, as well as reduced lateral movement. Which results in a crisper feeling trigger pull.
Requires experience to fit and requires tools such as a file or dremel.
Installation should only be done once other internal upgrades have been fitted and finalised as changes to parts such as the trigger bar and sears may result in additional work having to be done to restore previous performace regarding the pre/over-travel.
Colour may vary.
Installation:
1. Remove and disassemble stock trigger
2. Check fit of trigger to slide release - File down and polish both raised sections evenly until it rotates freely but has no side to side movement (this is the equivalent of placing shims on the trigger)
3. Insert trigger bar, spring and pin in to new trigger
4. Install trigger assembly into gun cock press down on the trigger bar and cock the hammer - the trigger bar should not spring back up.
5. Remove trigger and gradually file down the 2 front nubs evenly until the trigger bar springs back up and engages with the sear. Cheak the fit often. Optional - continue until the amount of trigger pretravel fits your personal preference (removing more will increase the amount of pretravel)
6. Adjusting the overtravel file down the 2 nubs on the trigger above the trigger bar. Cheak the fit frequently until when the trigger is pulled the hammer falls. Optional - continue until the overtravel fits your personal preference.
7. Optional -Sand and polish trigger surfaces to improve the surface finnish.
Trouble shooting:
Overtravel - sear moves but hammer doesn’t fall. Solution: Repeat step 6 and remove some more material off the top nubs. Only a very small amount should have to be removed to greatly increase the reliability.
Requires experience to fit and requires tools such as a file or dremel.
Installation should only be done once other internal upgrades have been fitted and finalised as changes to parts such as the trigger bar and sears may result in additional work having to be done to restore previous performace regarding the pre/over-travel.
Colour may vary.
Installation:
1. Remove and disassemble stock trigger
2. Check fit of trigger to slide release - File down and polish both raised sections evenly until it rotates freely but has no side to side movement (this is the equivalent of placing shims on the trigger)
3. Insert trigger bar, spring and pin in to new trigger
4. Install trigger assembly into gun cock press down on the trigger bar and cock the hammer - the trigger bar should not spring back up.
5. Remove trigger and gradually file down the 2 front nubs evenly until the trigger bar springs back up and engages with the sear. Cheak the fit often. Optional - continue until the amount of trigger pretravel fits your personal preference (removing more will increase the amount of pretravel)
6. Adjusting the overtravel file down the 2 nubs on the trigger above the trigger bar. Cheak the fit frequently until when the trigger is pulled the hammer falls. Optional - continue until the overtravel fits your personal preference.
7. Optional -Sand and polish trigger surfaces to improve the surface finnish.
Trouble shooting:
- Trigger pull doesn't release hammer every time - possible issues over-travel or pretravel not configured correctly.
Overtravel - sear moves but hammer doesn’t fall. Solution: Repeat step 6 and remove some more material off the top nubs. Only a very small amount should have to be removed to greatly increase the reliability.
- Trigger pull moves slide release/ slide release doesn't engage. Solution: Repeat step 2 as the trigger is not rotating freely within the slide release..
Details
What's in the box:
TM M&P9 Trigger (Metal)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
