White Natural Versatile Plastic
Korbanth Bane Crystal Chamber Chassis 21700 P1
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$44.42
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis for the Korbanth Dark Lord Bane hilts.
This is a permanent wired in battery design, not removable.
For this chassis you will also require P2 to complete the chassis. P3 is entirely and optional part.
This chassis is designed for use with:
-Proffie Board
-KR Sabers 28mm Bass speaker
-21700 Lithium Ion Battery
-2.1mm recharge port
-Two crystals or two of my generic chassis crystal (found on shapeways) and single neo pixel for each
-short off cut of pixel strip (if using the optional P3 part)
This design allows for the board to slide into place once wired up and tested.
Once the crystals are wired up and tested, the crystal requires being trapped and glued into the two halfs of the crystal chamber as they are assembled in to the chassis.
The P3 part can hold the speaker, but if you choose not to have the P3 part, the P2 part can hold the speaker instead.
Plan your wiring ahead of time!
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
This is a permanent wired in battery design, not removable.
For this chassis you will also require P2 to complete the chassis. P3 is entirely and optional part.
This chassis is designed for use with:
-Proffie Board
-KR Sabers 28mm Bass speaker
-21700 Lithium Ion Battery
-2.1mm recharge port
-Two crystals or two of my generic chassis crystal (found on shapeways) and single neo pixel for each
-short off cut of pixel strip (if using the optional P3 part)
This design allows for the board to slide into place once wired up and tested.
Once the crystals are wired up and tested, the crystal requires being trapped and glued into the two halfs of the crystal chamber as they are assembled in to the chassis.
The P3 part can hold the speaker, but if you choose not to have the P3 part, the P2 part can hold the speaker instead.
Plan your wiring ahead of time!
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
Details
What's in the box:
Bane CC 21700
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
