White Natural Versatile Plastic
Team PRP Kyosho USA-1 to Clodbuster Hub
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$5.33
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1 hub adapter. 4 required for complete truck with 4 wheels.
Use this hub adapter to put Kyosho USA-1 VE wheels (Kyosho part number KYOMAH403W) on your Tamiya Clodbuster. Designed for a snug fit on the Clod's brass hex. The Kyosho wheels have very little offset compared to the clod. Using them will make your clod approximately 15 3/4" wide. Kyosho rims are nice as they spin true and fit Clod tires and there are no screws in the wheel. JC Concepts Renegade tires fit nice and tight. The Kyosho wheels are the same dimensions as stock Clod/TXT wheels, except for the hub offset.
This adapter is designed with an oversized 17mm wheel hex for the Kyosho wheels and 12mm hex pocket to insert the Clod's brass hex.
Requires M4 Nylock Nuts and an M4 "fender/oversied" washer with an outer diameter (OD) of at least 15mm up to 25mm OD max. An imperial washer of 3/16" (#8) ID x 3/4" OD works perfect as well. I may be making carbon fiber outer washers for these wheels (to get rid of the steel washer and shed some weight). Keep a lookout on our Instagram and facebook for new releases.
Use this hub adapter to put Kyosho USA-1 VE wheels (Kyosho part number KYOMAH403W) on your Tamiya Clodbuster. Designed for a snug fit on the Clod's brass hex. The Kyosho wheels have very little offset compared to the clod. Using them will make your clod approximately 15 3/4" wide. Kyosho rims are nice as they spin true and fit Clod tires and there are no screws in the wheel. JC Concepts Renegade tires fit nice and tight. The Kyosho wheels are the same dimensions as stock Clod/TXT wheels, except for the hub offset.
This adapter is designed with an oversized 17mm wheel hex for the Kyosho wheels and 12mm hex pocket to insert the Clod's brass hex.
Requires M4 Nylock Nuts and an M4 "fender/oversied" washer with an outer diameter (OD) of at least 15mm up to 25mm OD max. An imperial washer of 3/16" (#8) ID x 3/4" OD works perfect as well. I may be making carbon fiber outer washers for these wheels (to get rid of the steel washer and shed some weight). Keep a lookout on our Instagram and facebook for new releases.
Details
What's in the box:
PRP usa1 wheel to clod hub
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
