Rhodium Plated Brass
PART 2 of 3: Oval Hilt Crystal Chamber
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$60.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
PART 2 OF 3
Oval Hilt crystal chamber.
THIS CHAMBER FITS MERCURY SABERS WITH 10" OR LONGER GRIP SECTIONS!
This is the top half of the crystal chamber for Ignition oval hilts.
This piece holds a 5mm LED to illuminate your chamber. A single pixel can be glued to the bottom with e-6000 if you prefer a pixel crystal chamber but you will need to cut into the chassis' end to make space for it.
Fits a 16mm marble. Cracked glass quartz marbles are available on eBay and Amazon.
*Please be sure you have at least 1" between the end of the chassis and the pommel where it inserts into the oval tubing. These chambers do NOT fit into the Mercury sabers with 9" long grips. It only fits Mercury sabers with grip sections 10" long or longer. Check your saber before ordering!
Oval Hilt crystal chamber.
THIS CHAMBER FITS MERCURY SABERS WITH 10" OR LONGER GRIP SECTIONS!
This is the top half of the crystal chamber for Ignition oval hilts.
This piece holds a 5mm LED to illuminate your chamber. A single pixel can be glued to the bottom with e-6000 if you prefer a pixel crystal chamber but you will need to cut into the chassis' end to make space for it.
Fits a 16mm marble. Cracked glass quartz marbles are available on eBay and Amazon.
*Please be sure you have at least 1" between the end of the chassis and the pommel where it inserts into the oval tubing. These chambers do NOT fit into the Mercury sabers with 9" long grips. It only fits Mercury sabers with grip sections 10" long or longer. Check your saber before ordering!
Details
What's in the box:
CChamberPT2 v2
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
