Clear Ultra Fine Detail Plastic
SquonkModX Tray V1.2 for Clickfet 1.0
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$7.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible. It has a built in N-channel mosfet capable of up to 100A current, 2 x blue LED and an intelligent chip to provide the on / off feature, low voltage detection, timeout and short protection. ClickFet v1 also has reverse polarity protection.
Required for SquonkModX V1.1 and above.
Requires ClickFet v1
You may also want to get this fire button with hole in it so you can see the LED.
Revisions: The base of the Switchfet underside has been lifted by 0.4mm to accomondate for smaller size of the clickfet board. The ends of the inlay for tray have been removed to accommodate 15mm length of the clickfet.
Notes: Ensure that the board sits within the diameter of the tray.
Required for SquonkModX V1.1 and above.
Requires ClickFet v1
You may also want to get this fire button with hole in it so you can see the LED.
Revisions: The base of the Switchfet underside has been lifted by 0.4mm to accomondate for smaller size of the clickfet board. The ends of the inlay for tray have been removed to accommodate 15mm length of the clickfet.
Notes: Ensure that the board sits within the diameter of the tray.
Details
What's in the box:
10072018_TRAY25-CLICKFET
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
