Gray PA12
DR10 / SC5M Front Splitter Mount
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$31.88
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This part lets you install a splitter onto the DR10 / SC5M platforms.
You will Need 6x M3x20mm Socket Head Screws and 6x M4x8mm Countersunk Screws as well as 2x M4 nuts.
This part is designed to be used with 1.5mm or 0.060in thick polycarbonate sheeting.
And you probably want to extend the sheet farther back and attach it to the chassis so the mount isnt taking all the weight.
To drill the holes, I just drilled one of the middle holes in the sheet. Screwed it on. Then marked the rest of the holes with a sharpie.
I have a printable hole diagram page available at the link below: https://drive.google.com/file/d/1JvgI0L4L6lbKW_V95MZXE0KN_IfVtkhS/view?usp=sharingFits:
DR10
Refllex
Trophy Rat
Pro SC10
SC5M
B5M
You will Need 6x M3x20mm Socket Head Screws and 6x M4x8mm Countersunk Screws as well as 2x M4 nuts.
This part is designed to be used with 1.5mm or 0.060in thick polycarbonate sheeting.
And you probably want to extend the sheet farther back and attach it to the chassis so the mount isnt taking all the weight.
To drill the holes, I just drilled one of the middle holes in the sheet. Screwed it on. Then marked the rest of the holes with a sharpie.
I have a printable hole diagram page available at the link below: https://drive.google.com/file/d/1JvgI0L4L6lbKW_V95MZXE0KN_IfVtkhS/view?usp=sharingFits:
DR10
Refllex
Trophy Rat
Pro SC10
SC5M
B5M
Details
What's in the box:
DR10 Front Splitter Mount
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
