White Natural Versatile Plastic
Korbanth Mara Jade Basic GHV3 Chassis
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$44.15
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis for the Korbanth Mara Jade hilts. This is a 0% mark up chassis, I make zero profit on this as a thank you to those who purchased the hilt, contributing to Shannon's medical bills.
Every printed part you need comes in this single listing, including the blade PCB holder. You just need to carefully remove the connecting stems between the parts.
This is a removable battery design. The battery tabs required are the type shown in the link below:
https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with:
-GHV3
-KR Sabers 28mm Bass speaker
-18650 Lithium Ion Battery
-High Amp kill switch
- ShtokCustomWorx Rotary NeoPixel & 2 Button PCB Connector Set (most likely requires sanding down on the outside diameter)
-Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
This design allows for the board to slide into place once wired up and tested.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
Every printed part you need comes in this single listing, including the blade PCB holder. You just need to carefully remove the connecting stems between the parts.
This is a removable battery design. The battery tabs required are the type shown in the link below:
https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with:
-GHV3
-KR Sabers 28mm Bass speaker
-18650 Lithium Ion Battery
-High Amp kill switch
- ShtokCustomWorx Rotary NeoPixel & 2 Button PCB Connector Set (most likely requires sanding down on the outside diameter)
-Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
This design allows for the board to slide into place once wired up and tested.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
Details
What's in the box:
Jimmy's Saber Junk Korbanth Mara Jade GHV3 Shapewa
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
