You must be logged in and verified to contact the designer.
Product Description
allows mounting shocks and 3 link with panhard or 4 link suspension to the rare RC4WD mini axle.
Note that this is for a single axle, for two axles you will need to order two copies.
Before installing screws, you WILL need to ream/drill the holes out to the size screw you are using. the ballmount holes are sized to accept the stock pivot balls from the Losi Trail Trekker, and should be reamed with a 2mm drill bit or 2mm flat blade screwdriver prior to threading the balls studs in place.
The screws that hold the truss to the axle are 0-80 screws, the truss caps should be cleaned out with a #52 drill bit (for the thru-holes) and the threaded portion of the hole should be reamed with a #56 or a 3/64" drill bit. 1.2mm would be the closest metric size drill bit and should also work.
you will need to purchase 1 package of screws from Mcmaster, part # 91255A001 and grind them to length. Measuring from beneath the head you will need 4 screws length .335" and 4 screws length .294"
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: