CraftBerg
[Umbra Eagles pattern]
EX-AM Belt feed Ammunition system for 28mm scale Primaris Redemptor Dreadnought.
Contains:
1x Ammunition system
The
Umbra Eagles pattern EX-AM ammunition system is a technology developed to feed the heavy onslaught gatling cannon for prolonged periodes of firing. The advanced mechanism is battle tested and all parts are blessed by the admech. The set construcion comes in 6 parts containing the upgrade. * Ammunition storage (2 parts), Ammunition belt, Ammunition belt mountreceiver, External gun plating for automated feed, Ammunition storage feeder.
(Changing gamerules or stats is up to users)(Does not actually improve your dice rolls while trying to hit target)
___________________________________________
Cleaning Information Steps
Parts might need to be cleaned extra when printed in Extreme quality frosted material.
1. Check for damage
2. Remove excess WAX residue from production process
with simple green and a soft brush with warm water.
3. Put the 3d printed product in sunlight to harden/cure for 2-3 hours.
Make sure its not too hot or the resin, or it might deform due to heat. under 30 degrees is fine.
4. Or check out in case of any issues: https://www.shapeways.com/blog/archives/22021-tips-n-tricks-for-painting-miniatures.html
Painting Information- Use water-based acrylic paints meant for miniature plastics is highly recommended.
- Other paints, especially enamels, may not cure if applied DIRECTLY on Frosted Detail 3D-printed plastics.
(But if it has a base coat it works fine.)
- Use dedicated model sprue cutters to remove parts to minimize the risk of damage to the parts.
Be sure to check out the other items in my store!
Buying helps me do this full-time! Support Craftberg!
DISCLAIMER:- This web store is completely unofficial, and its contents are in no way endorsed, or affiliated with Games Workshop.
- Not meant for children 14 years or younger
- These custom designed conversion components will arrive unpainted.