Philips Hue Switch V2 DoubleGang Plate (US Decora)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$31.57
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Double Gang Plate cover for the Philips Hue Dimmer Switch v2 (not included).
This 3D printed light switch plate cover fits a standard double gang US rocker (Decora) switch, and replaces your existing light switch plate, allowing space to install the Philips Hue Switch (using its existing adhesive tape or screws) on top for a flush, clean look.
⚡ For v2 Philips Hue Dimmer Switch form factor. Will not fit with v1.
⚡ No drilling, cutting, gluing, assembly, or electrical rewiring is needed.
⚡ There is no need to remove the wall switch box itself.
⚡ No additional hardware is needed, and it even uses the same screws from the original wall plate.
⚡ NOTE: The side screw holes are only needed if the adhesive mount isn't strong enough.
⚡ NOTE: Make sure the light switch is in the ON position, and working, before you mount the Hue Switch on top. But because the Hue Switch mount separates, you will still be able to access the wall switch after installing.
⚡ NOTE: Philips Hue Dimmer Switch NOT included.
⚡ NOTE: Please check plate dimensions before ordering. This is a standard size plate, so be sure it will cover the opening in your wall.
What you will receive:
⚡ One (1) double gang plate in the style configuration as pictured.
About the material finishes:
⚡ There are NO visible print lines, since this is printed using Selective Laser Sintering (SLS) technology.
⚡ The NATURAL 3D printed plastic has a slightly grainy texture.
⚡ The PROCESSED plastic goes through a machine tumbling process to smooth out the grain a bit, but will still have a matte finish.
Custom Configurations:
⚡ If you don't see a configuration that you need for your application, feel free to get in touch, and I can try to make something for you.
This 3D printed light switch plate cover fits a standard double gang US rocker (Decora) switch, and replaces your existing light switch plate, allowing space to install the Philips Hue Switch (using its existing adhesive tape or screws) on top for a flush, clean look.
⚡ For v2 Philips Hue Dimmer Switch form factor. Will not fit with v1.
⚡ No drilling, cutting, gluing, assembly, or electrical rewiring is needed.
⚡ There is no need to remove the wall switch box itself.
⚡ No additional hardware is needed, and it even uses the same screws from the original wall plate.
⚡ NOTE: The side screw holes are only needed if the adhesive mount isn't strong enough.
⚡ NOTE: Make sure the light switch is in the ON position, and working, before you mount the Hue Switch on top. But because the Hue Switch mount separates, you will still be able to access the wall switch after installing.
⚡ NOTE: Philips Hue Dimmer Switch NOT included.
⚡ NOTE: Please check plate dimensions before ordering. This is a standard size plate, so be sure it will cover the opening in your wall.
What you will receive:
⚡ One (1) double gang plate in the style configuration as pictured.
About the material finishes:
⚡ There are NO visible print lines, since this is printed using Selective Laser Sintering (SLS) technology.
⚡ The NATURAL 3D printed plastic has a slightly grainy texture.
⚡ The PROCESSED plastic goes through a machine tumbling process to smooth out the grain a bit, but will still have a matte finish.
Custom Configurations:
⚡ If you don't see a configuration that you need for your application, feel free to get in touch, and I can try to make something for you.
Details
What's in the box:
HueSwitchPlateV2-DoubleGang-1Hue1Decora_v02
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
