3 M Boom Section

3 M Boom section for Hitachi Sumitomo SCX1200 / 1500 in 1:50 scale
Also suitable for the Link belt 238
Don't forget the pendant set  : https://www.shapeways.com/product/UT5H36ZNN/pendants?optionId=61529091&li=shops.
----------------------------------------------
Spraypainting instructions for White Natural Versatile Plastic.
 
It's not easiest material to spraypaint but it can be done.
But this material it is the cheapest and strongest.
Difficulty is in the fact that its made from tiny melted together particals.
This has the characteristic that it sort of soaks your primer.

So the first layer of primer has to be done much thicker than you used to.
Sort of drown it in primer , you can use any cheap spraypaint primer you want.
Start spraying in layers and go on till you got the whole part sort of shiny wet , and let it dry.

Do some WET sanding with 360/500 sanding paper and spraypaint primer again the second layer.
Again some WET sanding with 360/500 sanding paper and spraypaint primer again the third layer.

Again some WET sanding with 500 sanding paper , now put on the first layer of paint.
Some WET sanding with 800 sanding paper and now put on the definite layer of paint.
Key is make thick layers but do not loose to much detail.

Ps the good part of this material is it can resist paint thinner so you can start over again
Good luck and do remember take your time for the best results.