Click and drag to rotate
046003-02 FAV and WO Tail Light Buckets 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
046003-02 FAV and WO Tail Light Buckets 3d printed
046003-02 FAV and WO Tail Light Buckets 3d printed

DIGITAL PREVIEW
Not a Photo

046003-02 FAV and WO Tail Light Buckets 3d printed
046003-02 FAV and WO Tail Light Buckets 3d printed

DIGITAL PREVIEW
Not a Photo

046003-02 FAV and WO Tail Light Buckets

Print With Shapeways
Choose Your Material
$8.13
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
At Ampro, we feel that lights should…light up. This tail light bucket is for the Tamiya Fast Attack Vehicle and the Wild One. They require surface painting and 5mm LED’s to finish them off. The LED’s will need to carefully be glued onto the posts in the light housing after small wires are soldered to the rear and fed out of the hole at the rear. We also suggest that the housing be tapped with a 3.0mm bottom tap for the 3mm screws required. Do not over tighten the screws and use a dab of thread lock to keep them secure. These are not designed for anything other than a very light runner or shelfer. Only one pair is included here.

 

The required rear lenses are Part Number: 046003-01

      
Details
What's in the box:
046003-02 FAV & WO Tail Light Housing
Dimensions:
4.2 x 1.8 x 1 cm
Switch to inches
1.65 x 0.71 x 0.39 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.