Sound Board PART 1/2 of MHS Custom Chassis V1_B_RP
/// "RP" stands for Recharge Port support
this version works with a 2.1mm Recharge Port,
but has no 3.5mm R.I.C.E. port holder ///
This is a custom chassis design solution that is compatible with some TCSS MHS hilt parts, but is not guaranteed to be suitable for all hilt parts combinations
(please take a look at chassis dimensions image). All chassis parts can be custom modified if needed.
Also works with
Korbanth Graflex 2.0/2.1, Korbanth MPP 2.0, Korbanth DV6, Graflex Vintage and Replica (TGS, JQ-sabers, 89-sabers, Roman Props), MPP Heiland Vintage/Replica with corresponding "Adapter" parts.
This "B" version DOES work with TCSS chassis discs!
To attach Hatch part to the main chassis body you need 1mm OD 57.5-59.5mm long brass/copper/aluminum or steel rods. Compatible with TCSS chassis disks and 4-40 threaded rods and hex nuts.
TCSS MHS hilt parts compatible custom chassis for:
- Multi Sound Board compatible: all Plecter and NEC sound boards (with NEC sound boards TruDrive board must be separated and located in other area - over the sound board or in other places) as well as TeensySaber and ProffieBoard. For TeensySaber V3 and ProffieBoard install you need a specific adapter:
- for ProffieBoard:
ProffieBoard Adapter for MHS Custom Chassis
- for TeensySaber V3 (SD on top):
TeensySaber Adapter V2 for MHS Custom Chassis
- for TeensySaber V3 (USB on top):
TeensySaber Adapter V1 for MHS Custom Chassis
- Color Xtender board instead of the battery pack (NEW feature)
- FSC-BT909 size or smaller (FSC-BT630) Bluetooth module (mount area - on the side under sound board next to the battery)
- 28mm TCSS 2W Bass speaker. Requires a "28mm Speaker Adapter PART 2/2"
- 31mm Bass speaker (from Adrian Tan or others). Requires a "31mm Speaker Adapter PART 2/2"
- 28mm TCSS 1.5W Premium speaker. Requires a "28mm Speaker Adapter PART 2/2"
- 3.7V 18650 or 7.4V 18350 (same length as a single 18650) battery pack
- 2.1mm recharge port (Low-Profile Kill Key included with this chassis)
- 3-pin terminal RICE connector:
- High current SPDT slide "Kill Switch":
INSTRUCTIONS: LINK