You must be logged in and verified to contact the designer.
Product Description
A super strong and light Pan-Tilt machanism for Mobius Action Cam and HXT900 9g servos.
I didn't design the mount for the whole mechanism. This reduces the cost for about 30%. You can cut a hole on the foam and stick the lower servo in with some hot glue (like I did for my Bixler).
Preferred assembling process:
center both servos before the following 1) secure servo arms to both parts with thin CA and self-tapping screws; 2) thread a piece of velcro through the slots of the upper part, adjust its position and secure it with a drop of hot glue; 3) install the tilt servo with M2 screws. Use some washers make small adjustment. then secure the pan servo with servo screw to the lower part; 4) use M3x10 bolt and locknut to hold the two parts together, with preferably a thrust bearing (http://bit.ly/1nTPW97) in between the parts. Alternatively, use several washers instead; 5) the material is flexible, pull the lower part sideways a bit, then fit the tilt servo to its arm. then secure it with servo screw.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: