White Natural Versatile Plastic
TSB-165A Fig-8 Side-By-Side
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.58
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a saddle and post for building a figure-8 microphone into a BM-800 style mic body. The post is designed to take two Transsound TSB-165A capsules. Wires route through two 3mm diameter holes on either side of the post that connect to a central 5mm diameter holes that runs down the center of the post. The capsules can be mounted into the saddles using E6000 or similar adhesive.
To mount the post to the microphone frame, slide four DuBro anti-vibration servo grommets into the slots in the base. The BM-800 frames are drilled and tapped to take M2.5 screws. M2.5x6mm screws are the shortest that will pass through the grommets and still engage the mic frame to full depth. M2.5x8mm screws are easier to use.
To mount the post to the microphone frame, slide four DuBro anti-vibration servo grommets into the slots in the base. The BM-800 frames are drilled and tapped to take M2.5 screws. M2.5x6mm screws are the shortest that will pass through the grommets and still engage the mic frame to full depth. M2.5x8mm screws are easier to use.
Details
What's in the box:
TSB-165A Fig-8 C
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$43.17
$20.77
$5.25
$12.25
