MP2 for RX Motor,Inline,Adj,Thick-Spherical Bushes
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$16.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
MP2 - 3D printed Motor Pod for Slot It 4 hole mounting.
- Designed to fit Slot It & JA Slots Chassis.
- Assembled axle slides into place & held by axle brackets.
- Inline configuration.
- Fits SCX 'RX' Motor.
- Wire needs to be soldered to motor connections.
- Fits SCX Spherical bushes, SCX (50440).
- Use M2 Flat head or grub screws to mount motor to the MP.
- Bush height adjustment of 1mm, using M2 grub screws for rear axle ride height adjustment.
- Axle brackets are secured with M2.2 screws.
- MP designed without space for a magnet.
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Motor Pod
2x Axle Bracket
(Ref: JA2)
- Designed to fit Slot It & JA Slots Chassis.
- Assembled axle slides into place & held by axle brackets.
- Inline configuration.
- Fits SCX 'RX' Motor.
- Wire needs to be soldered to motor connections.
- Fits SCX Spherical bushes, SCX (50440).
- Use M2 Flat head or grub screws to mount motor to the MP.
- Bush height adjustment of 1mm, using M2 grub screws for rear axle ride height adjustment.
- Axle brackets are secured with M2.2 screws.
- MP designed without space for a magnet.
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Motor Pod
2x Axle Bracket
(Ref: JA2)
Details
What's in the box:
MP2-Inline_AdjCap_Thick-SphBush-RX_Motor-Assembly-
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
