You must be logged in and verified to contact the designer.
Product Description
This is a mount designed for Pro-Line's Jerrycan (from their Scale Accessory – Assortment #1 6040-00) and High Lift jack (From their Scale Accessory – Assortment #2 6045-00).
Mounting Tips
This mount can be attached to any flat spot on your vehicle’s body using two 3mm flathead screws, double sided tape or a strong adhesive. The Jerrycan and High Lift can be attached using double sided tape or adhesive. Painting TipsPainting Tips
You can leave the part as it comes out of the package and mount them up but adding some paint will smooth out the part and add more detail. Here are some painting tips to help bring your Hetmanski Hobbies part to life.
Use Primer We recommend starting with three even coats of Testors Model Master White Primer which is part number 2948. Testors paints spray thick and therefore will help fill in the rough surface of the part. Wait 15min after each coat before spraying another.
Applying Color When applying your color of choice you’ll want to apply it the same way that you applied your primer. Spray even coats and three of them should get you full coverage. Wait 15min between coats. Again we recommend using Testors enamel paints due to their thickness and ability to fill in the grooves of your 3D printed part.
Let It Dry The longer you let Testors paints dry the better off you’ll be. Handling the part too soon will result in a part with finger prints and other marks in it. We recommend letting the paint dry for a minimum of two days before handling.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: