You must be logged in and verified to contact the designer.
Product Description
A set of Iron sights for the Tokyo Marui M&P9.
You will need to supply three 6x1.5mm Tritium vials, screws from the original rear sight and the mounting clip from the original front sight.
Installation: Thoroughly clean out the holes for the vials using a pin or paperclip removing any residual dust. Optional - Paint the sight your chosen colour and/or paint white dots for easier acquisition.
Ensure that the rear sight screws will not intrude in to the cavity for the vials - shorten the screws if necessary.
Insert the vials parallel to the slide, using gentle pressure takeing care to not snap or crack the vials.
Mount the sights on to the slide - you may find the rear sight easier to mount if you remove the BBU.
While it may not be necessary drilling out the holes with an appropriately sized drill bit will reduce the risk of cracking a vial on insertion. Use a small amount of glue to secure them.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: