Italeri 1:35 CCKW banjo corporation axles

This is a set of "banjo" or "corporation" axles for all of the Italeri CCKW 2-1/2 ton truck kits - #201, #205, and #271.  They replace the Timken "split axle" drivetrain, and add the option to pose the front wheels at an angle as if steering.  You will need to adapt the kit prop shafts and add them to the new axles after gluing the axles in place on the springs.  The Italeri wheels should be a simple fit on these new axles - use the two spacers on the backs of the front wheels to get the right width.  The left-hand front hub has the steering arm.  Note that there is a new transfer case to replace the kit part.

What do you get?
3 axles (front, middle, rear)
2 steering hubs (for front axle)
1 steering tierod
1 transfer box with brackets
1 pillowblock (sits on middle axle, connects rear axle prop shaft to main prop shaft)
2 link bars (connect rear axles to frame crossmember to limit sideways movement)
1 transverse link bar for rear bogie
2 front wheel spacers (to glue to the backs of the wheels)

For Tamiya trucks, please see my shop for a set designed exclusively to fit:
https://www.shapeways.com/product/PZ4S2B86S/tamiya-1-35-cckw-banjo-corporation-axles