Cherry Keeper Custom - CC2-XCTOLT-20
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.97
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Cherry Keeper Custom - CC2-XCTOLT-20
39mm total length, 32mm shaft inside diameter. HeadLock 26mm. This product is a locking cock ring and does not have a head segment of a cage. Length indicates measurement to the outside along the top.
This product utilizes the Cherry Keeper Gen 2 lock body which is 100% compatible with CK Gen 1! Gen 2 has a smoother lock body and reduces the bulk to increase comfort.
Total TouchStop
Total TouchStop is a mesh that covers all segments of a Cherry Keeper Cage except the tip. TouchStop is designed to prevent access to areas of skin within that portion of the cage while still allowing air and water access to the skin beneath.
HeadLock
The HeadLock feature adds a smaller ring to the entrance to the cage, restricting the opening in such a fashion as to hold the head in place when properly sized. The HeadLock ring will also put an end to casual pull-out attempts if a sufficiently large HeadLock size is chosen. No device of this style is 100% secure, but HeadLock makes it so that a serious effort must be put in to escape.
Product Details
Total Length: 39mm
HeadLock: 26mm
Shaft inside diameter: 32mm
Ring to Cage Gap: 8mm
Bar Profile: Circular, 5mm diameter
Locking Mechanism: Utilizes a standard chastity lock cylinder (Not included)
Ball Gap: (To standard ergonomic rings +/- 0.2mm)
Add-On Compatibility
Bullet Vibe: No
Unicorn: Yes
Cage renders And diagrams may be shown with a compatible Cherry Keeper Ring and/or brass lock, which are not included. Rings and locks are sold separately.
This cage is only compatible with Cherry Keeper Rings. It is NOT compatible with New Fun rings or rings from other devices.
Description version v20200502 updated on 5/12/2020 2:08:32 PM
39mm total length, 32mm shaft inside diameter. HeadLock 26mm. This product is a locking cock ring and does not have a head segment of a cage. Length indicates measurement to the outside along the top.
This product utilizes the Cherry Keeper Gen 2 lock body which is 100% compatible with CK Gen 1! Gen 2 has a smoother lock body and reduces the bulk to increase comfort.
Total TouchStop
Total TouchStop is a mesh that covers all segments of a Cherry Keeper Cage except the tip. TouchStop is designed to prevent access to areas of skin within that portion of the cage while still allowing air and water access to the skin beneath.
HeadLock
The HeadLock feature adds a smaller ring to the entrance to the cage, restricting the opening in such a fashion as to hold the head in place when properly sized. The HeadLock ring will also put an end to casual pull-out attempts if a sufficiently large HeadLock size is chosen. No device of this style is 100% secure, but HeadLock makes it so that a serious effort must be put in to escape.
Product Details
Total Length: 39mm
HeadLock: 26mm
Shaft inside diameter: 32mm
Ring to Cage Gap: 8mm
Bar Profile: Circular, 5mm diameter
Locking Mechanism: Utilizes a standard chastity lock cylinder (Not included)
Ball Gap: (To standard ergonomic rings +/- 0.2mm)
- 36mm ring: 10.9mm
- 38mm ring: 11.5mm
- 40mm ring: 12.4mm
- 42mm ring: 13.6mm
- 44mm ring: 14.9mm
- 46mm ring: 16.5mm
- 48mm ring: 18.2mm
- 50mm ring: 20mm
- 52mm ring: 22mm
Add-On Compatibility
Bullet Vibe: No
Unicorn: Yes
Cage renders And diagrams may be shown with a compatible Cherry Keeper Ring and/or brass lock, which are not included. Rings and locks are sold separately.
This cage is only compatible with Cherry Keeper Rings. It is NOT compatible with New Fun rings or rings from other devices.
Description version v20200502 updated on 5/12/2020 2:08:32 PM
Details
What's in the box:
CC2-XCTOLT-20 HL 3.0
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
