You must be logged in and verified to contact the designer.
Product Description
Use a caliper to measure your Track Depth from back web of channel to the uncut surface of the track = 16.5mm.
Choose Gray or Black Material (is a glass-filled nylon for more stiffness and strength).
The feed slot track was horz milled about 3.5mm depth.
Slot cut length = 4" and inside width = 11.9mm
3/16" hole needs to be drilled into the back web of feed slot so that the nipple of the insert can fit into it. This prevents the insert from sliding.
Need different size or Replacement, Contact: TomLuQue@gmail.com
Rev: 7/30/22 pg550b Pearson c3 TD16.5 v.110 (20 degree spread added for more snap-in holding)
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: