1/96 Flowers Class 14ft 6" Drifter Type Dinghy x2

1/96 Scale Royal Navy Flowers Class Corvette 14ft 6" Drifter Type Dinghy x2. Very highly detailed boat set, ideal for many WW2 Royal Navy Warships. These are modelled from the John Lambert Plans. Also see my 1/96 Scale 10ft x 5ft Carley Floats.

Details include:

• Ribs
• Floor Boards
• Rising, Gunwale, Rubbing Timber, Capping and Keel
• Rudder with steering mechanism
• Mounts are printed separately in case Dinghy is to be stored on Davits

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation