Black PA12
Catalina Capri TD=18mm 3.5 inch x 1/2"
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$79.63
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Select Black or the White textured nylon surface that can be dyed any color. BLACK for best UV protection.
(Life-time Warranty if it breaks: Replacement order is $25 plus shipping.)
Catalina Capri 22 2008
IMPORTANT: This insert is built for a Track-Depth of 18mm and the feed slot cut is 3 1/2" x 1/2" .
DRILLING INSTALLATION:
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit into each nipple's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum back web.
Remove the insert to center punch the drilling locations. First, use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins will key into the holes to prevent unintentional sliding of the insert.
Top & Bottom ends of the insert have notches. Squeezing notches with needle-nose of hemostat plyers to pull the insert up & out.
Please Register your purchase at Info@MastGates.com for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.
For free 2-year warranty and support, Please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque at info@MastGates.com
build ref# pg518A Capri TD=18mm 3.5 inch C22 C1
(Life-time Warranty if it breaks: Replacement order is $25 plus shipping.)
Catalina Capri 22 2008
IMPORTANT: This insert is built for a Track-Depth of 18mm and the feed slot cut is 3 1/2" x 1/2" .
DRILLING INSTALLATION:
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit into each nipple's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum back web.
Remove the insert to center punch the drilling locations. First, use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins will key into the holes to prevent unintentional sliding of the insert.
Top & Bottom ends of the insert have notches. Squeezing notches with needle-nose of hemostat plyers to pull the insert up & out.
Please Register your purchase at Info@MastGates.com for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.
For free 2-year warranty and support, Please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque at info@MastGates.com
build ref# pg518A Capri TD=18mm 3.5 inch C22 C1
Details
What's in the box:
pg518A Capri TD=18mm 3.5 inch C22 C1
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$60.88
$32.00
$43.66