White Natural Versatile Plastic
Korbanth Satele Proffie Chassis (2021)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$105.60
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis system for the Korbanth Satele saberstaff hilt (2021). It allows for the lower half of each chassis to be completely removed from the hilt for access to the sound board and removable battery.
When ordering, you will receive:
2 pixel PCB holders for the emitter
2 upper chassis (mounted in the switch area)
2 lower chassis
1 coupler shim (press fit in to the coupler to provide tension on the two lower chassis)
Required for installation:
2 Proffieboard v1.5 or v2.2: can be found at various retailers like The Saber Armory, Saberbay, CustomDarkwolf and Amazon to name a few.
2 18650 button top lithium-ion battery: https://www.illumn.com/batteries-chargers-and-powerpax-carriers/18650-keeppower-3120mah-sony-us18650vtc6-protected-high-discharge-button-top-p1831r-r-series.html
2 28 mm bass speaker: fits Smugglers Outpost Light/Dark, Saber Essentials, TCS WOW, etc.
2 High amp kill switch: https://www.digikey.com/en/products/detail/c-k/TS01CQE/484257)
2 Sets of battery contacts: https://www.digikey.com/en/products/detail/keystone-electronics/5223/316374 and https://www.digikey.com/en/products/detail/keystone-electronics/1017-1/4499386
2 Smugglers Outpost 14 pin chassis PCB sets: https://www.etsy.com/listing/884407969/so-pixelswitch-pcb-set-14pin-for
2 short-pin neopixel connectors: Can either use ShtokCustomWorx or CC Sabers.
Its recommended to use e6000 glue to secure the PCB holder in the emitter and to secure the 14 pin chassis pcb once its wired up.
When ordering, you will receive:
2 pixel PCB holders for the emitter
2 upper chassis (mounted in the switch area)
2 lower chassis
1 coupler shim (press fit in to the coupler to provide tension on the two lower chassis)
Required for installation:
2 Proffieboard v1.5 or v2.2: can be found at various retailers like The Saber Armory, Saberbay, CustomDarkwolf and Amazon to name a few.
2 18650 button top lithium-ion battery: https://www.illumn.com/batteries-chargers-and-powerpax-carriers/18650-keeppower-3120mah-sony-us18650vtc6-protected-high-discharge-button-top-p1831r-r-series.html
2 28 mm bass speaker: fits Smugglers Outpost Light/Dark, Saber Essentials, TCS WOW, etc.
2 High amp kill switch: https://www.digikey.com/en/products/detail/c-k/TS01CQE/484257)
2 Sets of battery contacts: https://www.digikey.com/en/products/detail/keystone-electronics/5223/316374 and https://www.digikey.com/en/products/detail/keystone-electronics/1017-1/4499386
2 Smugglers Outpost 14 pin chassis PCB sets: https://www.etsy.com/listing/884407969/so-pixelswitch-pcb-set-14pin-for
2 short-pin neopixel connectors: Can either use ShtokCustomWorx or CC Sabers.
Its recommended to use e6000 glue to secure the PCB holder in the emitter and to secure the 14 pin chassis pcb once its wired up.
Details
What's in the box:
Korbanth Satele Proffie Chassis (2021)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
