You must be logged in and verified to contact the designer.
Product Description
MastGate, nylon Snap-in insert, has a Track Depth of 18mm.
Made for feed slot cut length of 6", Width 1/2"
You will need to drill two holes for the insert's bottom nipples.
WHITE textured nylon surface can be dyed a color. BLACK is best for UV protection.
DRILLING INSTALLATION for Nipple pin : The insert sleeve is symmetrical, with two protruding nipple pins. Insert a #55 drill bit into each nipple pin's drill guide hole before centering the insert into the feed slot. Lightly hammer the drill bit to make a mark into the aluminum channel. Remove the insert to center punch marks and complete the drilling. Use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs. Nipple pins of the nylon insert will key into the holes to prevent unintentional sliding in the channel.
REMOVAL: Top and bottom ends of the insert sleeve have outer edge notches. Squeezing notches together with a large tweezer or hemostat-type plyers make it easy to pull the insert up & out.
For warranty and support, please register your purchase: Name, phone number, and email, the part number ordered, sailboat's year, make & model to: Tom Luque at info@MastGates.com