Pinball Trigger Finger LHS Stern

For Modern Stern Games

This is the LEFT bracket (in which it has a L on it) that is mounted over an existing Modern Stern roll-over playfield switch if you want to add a second switching device without fouling with games power / electronics system.

Alternatively you can add custom sounds to an older game by adding this bracket along with upgraded playfield switches and then add the required switch and linking that to a Wave Trigger Board while not tampering with the games power.

These brackets come in a left or right as better to have the original or upgraded playfield switch higher in the playfield and then the additional switch lower down the playfield.

You will need the following:
1 x DB3 switch per bracket to trigger whatever you are adding to your game
2 x 2mm bolts or imperial equivalent
2 x 2mm nuts or imperial equivalent

Note the DB3 switch is basically what Stern uses in their modern games though Pinball Life use a DB5 switch for there generic playfield rollover switch.

Note this bracket does not suit the Pinball Life Generic Switch.

Pinball Life Switches are:
https://www.pinballlife.com/rollover-switch-with-mounting-bracket.html

Additional Microswitches are:
- a DB3 microswitch - you will need to move the lever to the next rotating pin - see attached pictures
https://au.rs-online.com/web/p/micro-switches/0517567

Search - SwinksTriggerFinger - for the other parts