You must be logged in and verified to contact the designer.
Product Description
- Head rotation - Shoulder 2DOF each - Elbows - Legs w/Passive Knee's
The mechanical BODY will allow for 5x HS***MG/HB Servos to be installed. We would recommend that you use a HS645MG servo for the neck however lower spec servos can be used for the shoulders and legs. (HS485HB - HS311HB)
Also you will require 4x HS65MG/HB servos that fit into the arm to provide Shoulder and Elbow actuation. There are standoffs measuring at 47mm apart that is designed to hold an Arduino NANO Shield.
Required parts:
1x HS645MG Servo
4x HS65MG Servo's
4x HS311HB Servo's
-2mm Threaded Rod
-1mm Steel rod
-M2 Threaded ball joints
-M3 Bolts, washers and nuts.
- 4x 3x4x8mm Flanged bearings
For additional safety 'Springs can replace the Threaded rods in some joints to help ease motor strain and allow for better handling.