Windu EliteChassis - NO RICE (NB) - (Part 1/8)

Elite-Chassis for 89sabers Windu

Variant 2 WITHOUT RICE (for NB)

Mounting tips:
- Speaker:  Solder wires to your speaker and feed them through the hole, insert the speaker and attach the speakerholder. Solder the speaker wires to your board right befor you mount the boardholder to the chassis. Fill some hotglue to the wire cutout to improve sound performance.
- RCP: Insert the prewired 2.1mm chargeport through the hole and screw on the nut from the outside. Connect the RCP to board, battery and RICE.

 Features:
-Plecter Labs Prizm 5.1, Nano Biscotte V4, Crystal Shard 4.0/4.5
-18500 LI-Ion Battery
-2x 3mm accent LED
-crystal chamber
-1x 5mm crystal LED (rgb for violet)
-24mm bass speaker
-28awg wire required (0.09mm² cross section) / 0.25mm² cross section for battery and LED positive
-quick connector RICE port (2.54mm grid)
-2.1mm rechargeport
-snappers for 2W resistors (5mm OD)

Full assembly requires follwing parts to be purchased seperately by yourself:
-4x neodym magnets (round 4x1mm)
-set screws m3 thread or similar inch thread (2x 6mm long, 7x 4mm long, 2x 3mm long for chassis and heatsink retention)