Black Natural Versatile Plastic
M5 Stack Rear Cover
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$17.93
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a rear cover for an M5Stack Arduino-based computer. It is designed for use with the huVVer Tech power and interface board, available soon from huvverTech directly: http://www.huvver.tech/open-source-hardware/
Requirements:
M5 Stack Fire - None. This cover will replace the stock cover using the stock screws.
M5 Stack Black - None. This cover will replace the stock cover using the stock screws.
M5 Stack Grey - You will require two M3x16mm Socket-Head-Cap screws to replace the M3x6 screws that come with the unit.
Optional:
If you wish to use this with the optional mounting bracket, you will need one #6-32 Nylock nut pressed into the boss on the inside of the case. Stainless is recommended.
Part Number: 37-100-013_1.0.4
Requirements:
M5 Stack Fire - None. This cover will replace the stock cover using the stock screws.
M5 Stack Black - None. This cover will replace the stock cover using the stock screws.
M5 Stack Grey - You will require two M3x16mm Socket-Head-Cap screws to replace the M3x6 screws that come with the unit.
Optional:
If you wish to use this with the optional mounting bracket, you will need one #6-32 Nylock nut pressed into the boss on the inside of the case. Stainless is recommended.
Part Number: 37-100-013_1.0.4
Details
What's in the box:
37-100-013_1.0.4
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
