LNER/BR V3

A 3D printed body for an LNER/BR Gresley V3 tank locomotive design for use with a Graham Farish N class chassis. This print requires an addition 3D printed rear bogie which is available here: https://www.shapeways.com/product/A53TU2WSC/v1-v3-n2-trailing-trucks

Due to the design of the Graham Farish N class, it will be necessary to relocate the decoder plug into the loco body. This will require the disconection of wires to the plug and a new attachment formed directly to the locomotive chassis - this was achieved by soldering on the test build. The tops of the cylinders will need to be lowered by c. 0.5mm to achieve a lower fitting body. The chassis will need a little chamfering around the firebox area to achieve a good fit as well.

The builder will also need buffers, handrail knobs/wire and vacuum pipes to complete (all available from Nbrass Loco).

The builder will also need buffers, handrail knobs/wire and vacuum pipes to complete (all available from Nbrass Loco).