Black Natural Versatile Plastic
Part 1 Veracity Labs x 7Chambers x BRR Luke MoM
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$36.18
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is PART 1 , the main core chassis.
This is 2-part chassis with removable core which houses Proffieboard, 28mm Speaker, and removable 18650 battery holder. Optional soundboard cover part with holes for 2 sets of 2mm magnets.
You will need to acquire yourself (refer to picture):
- MoM hilt ;
- Crystal Chamber (also work without);
- Proffieboard 2.2;
- Battery Li-ion protected 18650;
- Battery contacts;
- 28mm bass speaker;
- SCWX Rotary Neopixel & 2 Button pcb connector;
- Blade-hilt pixel adapters of your choice;
- 4-pins SMT spring loaded connector with cross-section 2.5mm x 10-11mm and; uncompressed pin height no taller than 4mm; and
- Longer M3 countersink screw to replace control box provided screw for inner chassis retention. One screw is sufficient although I put two pilot holes if you want to replace both screws. I used 8mm in length.
PART 2 the inner chassis here;
https://www.shapeways.com/product/ZZCMAU6WG/veracity-labs-x-7chambers-x-brr-luke-mom-chassis?optionId=293158503&li=shops
OPTIONAL Board Cover here;
https://www.shapeways.com/product/PQXW753EY/mom-board-cover?optionId=293155195&li=shops
This is 2-part chassis with removable core which houses Proffieboard, 28mm Speaker, and removable 18650 battery holder. Optional soundboard cover part with holes for 2 sets of 2mm magnets.
You will need to acquire yourself (refer to picture):
- MoM hilt ;
- Crystal Chamber (also work without);
- Proffieboard 2.2;
- Battery Li-ion protected 18650;
- Battery contacts;
- 28mm bass speaker;
- SCWX Rotary Neopixel & 2 Button pcb connector;
- Blade-hilt pixel adapters of your choice;
- 4-pins SMT spring loaded connector with cross-section 2.5mm x 10-11mm and; uncompressed pin height no taller than 4mm; and
- Longer M3 countersink screw to replace control box provided screw for inner chassis retention. One screw is sufficient although I put two pilot holes if you want to replace both screws. I used 8mm in length.
PART 2 the inner chassis here;
https://www.shapeways.com/product/ZZCMAU6WG/veracity-labs-x-7chambers-x-brr-luke-mom-chassis?optionId=293158503&li=shops
OPTIONAL Board Cover here;
https://www.shapeways.com/product/PQXW753EY/mom-board-cover?optionId=293155195&li=shops
Details
What's in the box:
jawasdepot_MOM-core
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
