White Natural Versatile Plastic
Korbanth Ren Crystal Chamber Verso Chassis P1
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$59.27
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis for the Korbanth Ren hilts.
For this chassis you will also require P2 of the design.
This chassis is designed for use with:
-Verso
-KR Sabers 28mm Bass speaker
-18650 Lithium Ion Battery
-Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
-6x6x4.3mm tactile switche
-2.1mm recharge port
-one of my generic chassis crystal (found on shapeways) and single neo pixel
This design allows for the board to slide into place once wired up and tested.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
For this chassis you will also require P2 of the design.
This chassis is designed for use with:
-Verso
-KR Sabers 28mm Bass speaker
-18650 Lithium Ion Battery
-Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
-6x6x4.3mm tactile switche
-2.1mm recharge port
-one of my generic chassis crystal (found on shapeways) and single neo pixel
This design allows for the board to slide into place once wired up and tested.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue to secure it.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
Details
What's in the box:
Verso
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
