Tan Fine Detail Plastic
2x OO Hudson Tipping Wagons
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$78.81
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Founded in 1865, the Robert Hudson Company of Leeds produced a variety of tipping wagons for narrow and standard gauge track. This model represents a 200 Cubic Foot (5.7 m^3) capacity, 8' ( 2.4m) wheelbase, UK standard gauge example.
NOTES
UPDATE HISTORY
NOTES
- This model has been rescaled and updated from my N Gauge equivalent.
- Basic brake gear and buffers included, but these varied between prototypes, so you might want to replace them.
- Release the tipping body from the chassis by cutting the short round sprue at each end.
- The tipping body, buffers and coupling hooks can be attached to the chassis with cyanoacrylic adhesive (Superglue, etc). Roughening the surfaces to be glued will enhance the joints.
- The axle-boxes have 2mm pilot holes printed. Drill out for your preferred wheelsets, such as Bachmann Branchline 36-028 with the axle points filed flush with the wheel face.
- The chassis has cutouts for swiveling NEM pockets, such as the Bachmann Branchline 36-027.
UPDATE HISTORY
- 10 March 2021 - Initial release of re-scaled, updated N-Gauge model.
- 04 April 2021 - Brake gear now printed in-situ and model paired.
Details
What's in the box:
2x OO Hudson 20210404
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
