Pimoroni Trackball Top Shell
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$6.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Designed this top shell to replace the shroud that comes attached over the pimoroni trackball. The stock trackball shell is removed by gently squeezing the retention clips together underneath the PCB.
The additional purposes of the shell are to shroud the breakout solder pins as well as provide a level housing extending the original top face of the stock shell to be flush with M2 hex socket head cap mounting screws. The head caps of the M2 screws pictured are 3.5mm in diameter and 2mm in height.
The file is really only designed for MJF, SLA, SLS printing or similar. The thin roof of the trackball cavity and its hole edge radiusing do not play well with FDM, making it not sit flush against the trackball housing and PCB.
The additional purposes of the shell are to shroud the breakout solder pins as well as provide a level housing extending the original top face of the stock shell to be flush with M2 hex socket head cap mounting screws. The head caps of the M2 screws pictured are 3.5mm in diameter and 2mm in height.
The file is really only designed for MJF, SLA, SLS printing or similar. The thin roof of the trackball cavity and its hole edge radiusing do not play well with FDM, making it not sit flush against the trackball housing and PCB.
Details
What's in the box:
pimoroni-top-shell v7
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
