10x2 FSR Loader + STL File

Made by

Mando-Works

Print With Shapeways

Choose Your Material

$87.97

Versatile Plastic
Starting at $ 87.97

Choose your color and finish

Have a question about this product?

contact the designer

You must be logged in and verified to contact the designer.

Product Description

A 20 round ( 10 x 2) capacity loader for First Strike rounds. Fill the loader with First Strike rounds before a game and stick it in a pouch or pocket - built in detents at both ends prevent projectiles from falling out.

When it's time to load your mags, place a channel of the loader over the opening of your mag then push the rounds down one at a time and load them into your mag.

Try replacing mags with loaders in your setup in order to cut weight and bulk while still being only seconds away from fully loaded mags. Or store your FSR's in loaders instead of pods to reduce fin chipping and make loading easier. Instead of dreading reloads, embrace them!

Notes:

This is a Loading Tool intended to speed up the loading of magazines that are used in magazine fed paintball markers. It is not a magazine itself.
Depending on what kind of mag you are using you may be able to slide all the rounds in one channel of the loader into your mag at once. This typically works best on mags that have fully retracted loading gates or detents but is possible on other mags with practice.
To prevent rounds from flipping or getting stuck inside the loader:
- Select a smoother finish like processed plastic.
- Avoid partially filling the loader; always fill it to capacity.
- Use shorter loaders if possible; they are less prone to deforming or bending.
- Use a fine grit sandpaper to smooth any remaining rough spots or sharp edges left inside the loader after printing.

STL File Included
This listing also included a download of the model's STL file. If you have the appropriate software and printing equipment you can use the included STL file to customize, improve, and print additional loaders for your own use. PLEASE NOTE: As of 2020 this model has not been tested in any FDM printer - some effort and experimentation may be required to find the optimum material type and print settings to achieve a print which can stand up to its intended use.