Click and drag to rotate
Starship - 1:87 (H0 scale) 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
Starship - 1:87 (H0 scale) 3d printed
Starship - 1:87 (H0 scale) 3d printed

DIGITAL PREVIEW
Not a Photo

Starship - 1:87 (H0 scale)

Print With Shapeways
Choose Your Material
$205.18
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Deutsch
Straship Bausatz für  1:87 
- unbemalt, ohne Deko und in weiß
- inklusive Schriftzug und Sterne
- 1:87 passend für Minimotoren mit Mikrogetriebe (nicht enthalten)
Beispiel - sol-expert-1.150 - 6V (bei manchen Modellen ist 12V besser) oder 1:298 wenn es langsamer sein soll
- Motor wird festgeschraubt (M1,6x3x Kopfhöhe 1,25) nicht enhalten
- Es wird eine Unterlegscheibe mit 1,5 mm Höhe und Minimum Innendurchmesser von 12 mm benötigt
- Ich garantiere nicht, dass eine Verklebung des Motors funktioniert.
- Es könnte sein, dass die Löcher für den Motor geweitet werden müssen. Ich mache das mit einem 4mm Bohrer per Hand und mit einer Pinzette
- Alle Räder im Modell sind unbeweglich. Zwischen Stützrädern und Gondel ist ein Abstand von ungefähr 1,5mm
- kann auch als Standmodell gebaut werden
- Alle Angaben ohne Gewähr
 
English
Starship  kit for 1/87
- unpainted, without deco and white
- Logo and Stars included
- 1/87 fits the minimotor with microdrive not included
example - sol-expert-1.150 - 6V (sometimes it is better to use a 12V) oder a bit slower 1.298
- motor has to be screwed on (M1,6x3x Headhight 1,25) not included
- a washer with minimum 1.5 mm hight and a Innerdiameter of 12 mm is needed
- I do not guarantee that an adhesive bond works.
- It could be that the holes, where the motor is mounted on are not wide enough. For the center i use a 4 mm drill per hand and an old tweezer for the others.
- all wheels included in this set are static. There is a gap between supporting wheels and gondula of about 1.5mm.
- can be build as static model
- all statements without responsibility

Das Modell ist nicht getestet. Es könnte sein, dass der Antrieb ein wenig anders verbaut werden muss -
The model has not been tested it could be, that the drive has to be fit in.

normaler Zaun - normal fence (1:220)
click

Irrtum vorgehalten - errors expected

ACHTUNG.
Die Designs in diesem Shop sind zum Zweck des Modellbaues oder sammelns bestimmt. Sie können verschluckbare Kleinteile enthalten die für Kleinkinder  0-3 JAhre ein Erstickungsrisiko darstellen können oder müssen mit einem Messer auseinandergeschnitten werden. Es ist kein Spielzeug! Sie sollten grundsätzlich nur von Personen über 14 Jahren oder unter Aufsicht eines Erwachsenen verwendet werden.
ATTENTION.
The designs in this shop are designed for modeling purposes or collecting only. It is not a toy. They may contain small parts which can be swallowed which can be a chocking hazzard for children 0-3 years or have to be seperated with a knife.
They should only be used by persons over 14 years of age or under supervision of an adult.
Details
What's in the box:
starship_87_gravitron
Dimensions:
20.29 x 13.44 x 9.06 cm
Switch to inches
7.99 x 5.29 x 3.57 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.