Clear Ultra Fine Detail Plastic
1:8 BTTF DeLorean Radiator
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$13.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is another improvement for the left pontoon of the 1:8 scale Delorean, the radiator. These are the things I fixed in comparison with the stock part 81B from issue 81:
1) the stock part consisted of just one radiator unit while there should be 2 on top of each other.
2) the tube was not round but flattened over the whole length while it should be flattened only at the ends where it is bent.
3) there was a weird bend in the tube the line of the short one not being straight. My design fixes this too.
Installation
To install this radiator you just insert the pins on the black bottom grille of the radiator just like the normal part. You will need to remove the two pins of the top grille indicated by the red arrows in the attached picture. Then you can just clip the top grille in place.
1) the stock part consisted of just one radiator unit while there should be 2 on top of each other.
2) the tube was not round but flattened over the whole length while it should be flattened only at the ends where it is bent.
3) there was a weird bend in the tube the line of the short one not being straight. My design fixes this too.
Installation
To install this radiator you just insert the pins on the black bottom grille of the radiator just like the normal part. You will need to remove the two pins of the top grille indicated by the red arrows in the attached picture. Then you can just clip the top grille in place.
Details
What's in the box:
Radiator
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
