Gray PA12
CNC sensor bracket 2.5mm stand-off
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$7.93
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a sensor bracket a small bench style cnc router. It has a slightly over 5mm wide slot to mount via the typical 5mm bolt and 5mm t-nut.
The 4 x smaller holes (slightly over 3mm) is for mounting a microswitch in one of two directions allowing this bracket to be versatile. Simply drop a 2.5mm / 3mm bolt and nut on the other side and with the 2.5mm riser on the slot allows you to keep the nuts free from touching your extrusion.
There is another option with a 5mm riser for the situation that your plate that will connect with the switch sits out further.
Search "swinkscnc" for various option brackets.
The 4 x smaller holes (slightly over 3mm) is for mounting a microswitch in one of two directions allowing this bracket to be versatile. Simply drop a 2.5mm / 3mm bolt and nut on the other side and with the 2.5mm riser on the slot allows you to keep the nuts free from touching your extrusion.
There is another option with a 5mm riser for the situation that your plate that will connect with the switch sits out further.
Search "swinkscnc" for various option brackets.
Details
What's in the box:
CNC sensor bracket 2.5mm stand-off
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
