You must be logged in and verified to contact the designer.
Product Description
I made this bracket for a couple of reasons.
1/ I wanted a lanyard attachment on the controller
2/ I was experiencing a scary situation where part of my palm would press the play icon on the screen while I was flying and I would lose the picture from the drone as the controller switched to review mode.
This design tackles both of the above issues. There is a lanyard loop and there are raised gaurds that prevent my palm from contacting the touch screen.
The bracket attaches using the two M4 threads built into the base of the controller and allows for using two M2 screws on the back of the controller. (These aren't really necessary)
You will need two M4 x 10mm screws.
There is still access to the two USB ports and the SD card slot with the bracket attached.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: