White Natural Versatile Plastic
Dragon Transport Stud REAR (Left Side)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Use this in conjunction with the Dragon Left Stud FRONT to repair the transport studs on your Nakamichi Dragon.
You'll need to clean the powder out of the holes first. I then spray varnish on the studs as the sintered effect of the 3D print can get grubby quickly. Use the screws from the original studs to slowly cut threads inside, but be careful not to crack to studs by cutting the screw in one turns at a time - each time removing the screw to clean it of debris. Once the screws can go all the way in, use epoxy on the front stud to glue it into the rear stud and use the REAR screw in the front to hold the studs together while they dry.
You'll need to clean the powder out of the holes first. I then spray varnish on the studs as the sintered effect of the 3D print can get grubby quickly. Use the screws from the original studs to slowly cut threads inside, but be careful not to crack to studs by cutting the screw in one turns at a time - each time removing the screw to clean it of debris. Once the screws can go all the way in, use epoxy on the front stud to glue it into the rear stud and use the REAR screw in the front to hold the studs together while they dry.
Details
What's in the box:
Dragon Transport Left Back Post
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$6.11
$6.01
