White Natural Versatile Plastic
TSB-2590A Ambisonic rev 1.1a
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.77
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a saddle and post for building ambisonic microphones into a BM-800 style mic body. The post is designed to take four Transsound TSB-2590A capsules. Wires route through a single 5mm diameter holes that runs down the center of the post post.
The capsules can be mounted into the saddles using E6000 or similar adhesive. Warning: Once the capsules are glued in place, access to the rear side for soldering is extremely restricted. Solder the wires on first!
To mount the post to the microphone frame, slide four DuBro anti-vibration servo grommets into the slots in the base. The BM-800 frames are drilled and tapped to take M2.5 screws. M2.5x6mm screws are the shortest that will pass through the grommets and still engage the mic frame to full depth. M2.5x8mm screws are easier to use.
NOTE: THIS WILL NOT FIT INSIDE THE BM-800 HEAD BASKET!
Since the TSB-2590A capsules are shielded, as long as you have a good ground connection to your cable shield, the headbasket does not have to serve as a Faraday cage for the capsules and wiring. A plastic head basket will work just fine. The post on this is sized to locate the capsules in the center of a wiffle ball.
The capsules can be mounted into the saddles using E6000 or similar adhesive. Warning: Once the capsules are glued in place, access to the rear side for soldering is extremely restricted. Solder the wires on first!
To mount the post to the microphone frame, slide four DuBro anti-vibration servo grommets into the slots in the base. The BM-800 frames are drilled and tapped to take M2.5 screws. M2.5x6mm screws are the shortest that will pass through the grommets and still engage the mic frame to full depth. M2.5x8mm screws are easier to use.
NOTE: THIS WILL NOT FIT INSIDE THE BM-800 HEAD BASKET!
Since the TSB-2590A capsules are shielded, as long as you have a good ground connection to your cable shield, the headbasket does not have to serve as a Faraday cage for the capsules and wiring. A plastic head basket will work just fine. The post on this is sized to locate the capsules in the center of a wiffle ball.
Details
What's in the box:
TSB-2590A Ambi 1.1a
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
