Hammerhead Karoo 2 Farsports F1 Insert

Features:

• MagCAD Hammerhead Karoo 2 insert for Farsports F1 handlebar mount.
• Replaces the Garmin/Wahoo insert on the Farsport F1 mount, allowing you to then mount a Hammerhead Karoo 2 computer.
• Weighs just 12 grams without hardware.

Overview
This MagCAD insert replaces the Garmin/Wahoo insert in your Farsport F1 out front mount, allowing you to mount a Hammerhead Karoo 2 cycle computer.

The insert is designed with a 34.8mm outside diameter and 20mm hole centres to suit the Farsport mount but may also fit other installations.

Application
Fitting the MagCAD insert is a simple process. Simply remove the insert from your Farsport mount with a 2.5mm Allen key and install the MagCAD insert with 2x M3x12mm cap screws and 2x M3x0.5mm Nyloc nuts, hardware not supplied by Shapeways.

To attach your Hammerhead device simply follow the same procedure as with the OEM Hammerhead mount, pulling the device backward onto the mount with a slight twist to centre and locate it. You should here a positive click when the device is attached. We recommend using the tether that's supplied with your Hammerhead device just for extra security.

The below hardware is required and very simple to source locally:

• 2x M3x12mm cap screws.
• 2x M3x0.5mm Nyloc nuts.

About Me
I’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others.

Feel free to get in contact with any questions or feedback. Individual customisation will be considered.

Model Revisions
Revision 1 - Production Issue

Disclaimer
This product and/or service is not affiliated with, endorsed by or in any way associated with Hammerhead Navigation, Inc. or its products and services. Hammerhead and their respective logos are trademarks or registered trademarks of Hammerhead Navigation, Inc.